Media storage
•
Three 5.25-inch device bays
•
Optical disc drive (ODD) installed in the topmost bay
(DVD-ROM or combo drive)
•
Two 5.25-inch bays support installation of optional DAT and
AIT tape drives
•
One hard disk drive (HDD) cage bay supports the following
options:
•
Hot-swap
•
Up to four SAS or SATA II drives
•
Media storage options
•
One 3.5-inch floppy disk drive (FDD) bay for optional FDD
installation
I/O ports
•
Two front USB 2.0 ports
•
PS/2 keyboard port
•
PS/2 mouse port
•
Serial port
Power supply and ventilation
•
350-watts ATX 12V PFC power supply with auto switching function
•
Support for the following cooling components:
•
One rear system fan
•
One processor heat sink-fan (HSF) assembly
•
Optional HDD fan for systems using at least two hard drives
are installed in adjacent HDD bays.
3
The hot-swap HDD configuration is only available when the optional hot-plug
backplane board is installed in the HDD cage.
3
or easy-swap HDD cages
•
Monitor port
•
Two rear USB 2.0 ports
•
One Gigabit LAN port
(RJ-45)
5