How To Use Dry Mill - Panasonic MX-M300 Operating Instructions Manual

How to Use Dry Mill

This Dry Mill is designed for grinding dry ingredients such as coffee beans, dried pepper and spices.
Note:
• Working capacity: 50 g (coffee beans).
• Do not operate with an empty Dry Mill.
• Do not put liquid into the Mill Container.
• When removing the ingredients, be careful with the Mill Cutting Blade.
• Do not remove the Dry Mill Unit from the Motor Housing until the rotation stops completely.
• Do not drop the appliance to avoid damaging it.
• It is prohibited to place following kinds of ingredients in the Mill Container: Meat, fi sh, hard ingredients (example:
turmeric, dried soya beans, frozen ingredients, Cassia cinnamon), very sticky ingredients (example: peanut butter),
oily ingredients (example: peanuts, walnuts) or wet ingredients.
• Remove the ingredients from the Mill Container and clean it immediately after blending.
• When placing solid or granular spice, do not exceed 1/3 of the maximum level for dry ingredients.
Turn the Mill Container upside down and fi ll in the ingredients.
Place the Mill Container Base onto the Mill Container and turn it clockwise until a "click" sound is heard.
Place the Dry Mill Unit onto the Motor Housing.
Turn the Dry Mill Unit clockwise until a "click" sound is heard.
Plug into the rated power supply.
Turn on the Dry Mill by pressing "I".
• Support the Dry Mill Unit while in use to ensure that it is stable.
After blending, switch off by pressing "O".
Unplug.
Turn the Dry Mill Unit anticlockwise and remove it from the Motor Housing.
Turn the Dry Mill Unit upside down and turn the Mill Container Base anticlockwise to remove it from the Mill
Container.
Remove the ingredients.
EN8
Blender_MX-M300_210_200_100_EVT.indb 8 Blender_MX-M300_210_200_100_EVT.indb 8
Maximum
level for dry
ingredients
6/11/2019 11:58:50 AM 6/11/2019 11:58:50 AM