How To Use Wet & Dry Mill - Panasonic MX-V310 Operating Instructions Manual

How to Use Wet & Dry Mill
This Wet & Dry Mill is designed for grinding dry ingredients such as coffee beans, dried pepper and spices.
It also can blend wet ingredients such as chilli, banana, tomato and such.
■
Note:
• Working capacity: Dry: 50 g (coffee beans), Wet: 0.2 L
• Do not operate with an empty Wet & Dry Mill.
• When removing the ingredients, be careful with the Mill Cutting Blade.
• Do not remove the Wet & Dry Mill from the Motor Housing until the rotation stops completely.
• Ensure that the Mill Cutting Blade stops completely before proceeding to the next P1 or P2 operation.
• Ensure to assemble the Mill Container Base to the Mill Container. Do not use the Blender Jug Base for this assembly.
• Do not drop the appliance to avoid damaging it.
• It is prohibited to place following kinds of ingredients in the Mill Container: Hard ingredients (example: turmeric, dried
soya beans, frozen ingredients, Cassia cinnamon), ingredients with high hard fi bre, very sticky ingredients (example:
peanut butter), or any ice cubes.
Turn the Mill Container upside down and fi ll in the ingredients.
Place the Mill Container Base onto the Mill Container and turn it clockwise until it is tight.
Place the Wet & Dry Mill onto the Motor Housing and make sure the triangle marks on the Mill Container and
Motor Housing are aligned as A.
Turn the Wet & Dry Mill clockwise until a "click" sound is heard and make sure the marks are aligned as B.
Plug in to the rated power supply.
Turn on the Wet & Dry Mill by pressing the required speed.
• Support the Mill Container while in use to ensure that it is stable.
After blending, switch off the power supply.
Unplug.
1 2
Turn the Wet & Dry Mill anticlockwise and remove it from the Motor Housing.
Turn the Mill Container Base upside down and turn the Mill Container Base anticlockwise to remove it from the
Mill Container.
Remove the ingredients.
Blender_MX-V310_300 (EVT).indb 9 Blender_MX-V310_300 (EVT).indb 9
P1 P2 1 2 P1 P2
A
B
EN9
11/28/2017 6:31:07 PM 11/28/2017 6:31:07 PM