Table of Contents
Advertisement
Panel information
The 'Panel Information' option allows the user to edit user access codes, set the systems time and date and
to carry out a lamp and buzzer test on the panel.
Edit users
The 'Edit Users' option is not currently implemented in this version of software.
Panel options > Set time & date
The 'Set Time & Date' menu allows the user to programme the systems time and date. The time and date will
be displayed on the LCD display and is also used for time stamping events in the historic event log. Whilst
the time and date is not set, the following display will be shown:
Fire Control Panel
System Normal
00:00
Note: The time will require updating twice yearly for GMT/BST, unless 'Daylight Saving Mode' is activated at
the engineers access level 3. For more information, contact your installer/maintenance company.
Panel options > Lamp / buzzer test
Once selected, the SmartCell control panel will perform a lamp buzzer test.
Language select
The 'Language select' option allows the user to change the SmartCell control panel's language selection to
the secondary language that has been programmed. Once selected, the menu structure will be displayed in
the selected language, for the duration that the users menu access. Once the user exits the menu to the
front display, plus a further 30 seconds of inactivity, the system will revert back to the primary language.
For more information, contact your installer/maintenance company.
Access level 3
Access level 3 is intended for use by the system installer/service contractor via an engineers code.
Logout
The 'Logout' option allows the user to exit the menu immediately. Further access to the SmartCell control
panel's menus will require the user code to be re-entered.
©2021 EMS Ltd. All rights reserved.
Access
Page 23 of 28
Fire Control Panel
System Normal
01/01/00
TSD113-0001-99 (Issue 3) 19/05/2021 AJM
Access
Hide quick links:
Advertisement
Table of Contents
