EMS SmartCell User Manual page 21

Panel I/O options
'Panel I/O options' allows the user to select to disable and enable the control panel's hardwired inputs and
relay outputs, plus alarm and fault communication to the Alarm Receiving Centre (ARC). All options can also
be disabled for a time period from this menu, programmable between 1-24 hours in 1 hour steps.
Note: when disabling alarm and fault communication to the ARC (via the 'Alarm Comms' and 'Fault Comms'
options), communication to SmartCell Services will be unaffected.
For more information, contact your installer/maintenance company.
Information zones
The 'Information Zone' option allows the user to select individual zones ranging between the information
zones programmed on the system (max 1-48). The zones can be disabled or enabled from this menu. The
zones can also be disabled for a time period from this menu programmable between 1-24 hours in 1 hour
steps. No fault or fire conditions will be displayed from any device that is associated to a disabled zone.
Information devices
The 'Information Devices' option allows the user to select individual devices. The device can be disabled or
enabled from this menu. The devices can also be disabled for a time period from this menu programmable
between 1-24 hours in 1 hour steps. No fault or alert conditions will be displayed from any device that is
currently disabled.
Enable all
The 'Enable All' option allows the user to enable all currently disabled devices and zones in one action.
©2021 EMS Ltd. All rights reserved. Page 21 of 28 TSD113-0001-99 (Issue 3) 19/05/2021 AJM