Access Levels; Default User Access Code; User Menu Entry - EMS SmartCell User Manual

Access levels

This SmartCell control panel has four different levels of user access available. They are levels 1, 2, 3 and 4.
Access level 1
This access level is for daily use, where menu entry is not required. Prior to the entry of a user access code or
turning the enable key on, only the navigational buttons and the SILENCE BUZZER button are functional. All
other buttons are inhibited.
Access level 2
This access level is for advanced end users and is available via the entry of a user access code, or via the
enable key switch. All end user menu features and all SmartCell control panel buttons will be available.
Access levels 3 & 4
These access levels are intended for engineer use only.

Default user access code

The system requires a user access code to enter the user menu (access level 2). The default user access code
is 2222. This can be changed by your installer/maintenance company if required.
User menu entry (access level 2)
In order to navigate the user menu (access level 2), either turn the control key switch to the ON position, or
follow the steps listed below.
Fire Control Panel
System Normal
12:12
To enter access level 2 options press the
©2021 EMS Ltd. All rights reserved.
Access
button. The display will change to show:
For Access
Enter Code:
Press to complete
Page 14 of 28
Fire Control Panel
System Normal
11/01/20
TSD113-0001-99 (Issue 3) 19/05/2021 AJM
Access