Fire Control Panel Buttons - EMS SmartCell User Manual

Fire control panel buttons

Control
feature
ALARMS
The ALARMS SOUND/SILENCE button is used to sound the alarms and to silence them
when they are ringing. Wireless output devices can also be switched on and off
(dependant on programming). This button only becomes active once a valid user
access code has been entered, or the keyswitch has been enabled (turned to the on
SOUND/
position).
SILENCE
The SILENCE BUZZER button is always active and is used to silence the SmartCell
control panel's internal buzzer.
SILENCE
BUZZER
The RESET button is used to reset fire and fault events. This button only becomes
active once a valid user access code has been entered, or the keyswitch has been
enabled (turned to the on position).
RESET
This button is always active and is used for number entry (number 1) and for upwards
1
menu navigation.
This button is always active and is used for number entry (number 2) and for forwards
2
menu navigation.
This button is always active and is used for number entry (number 3) and for
3
downwards menu navigation.
This button is always active and is used for number entry (number 4) and for
4
backwards menu navigation.
This button is always active and is used as a menu entry button.
The FUNCTION 1 button is fully programmable. Its default operation, is to toggle
FUNCTION 1
between the primary and secondary languages that are programmed to the system.
This button only becomes active, once a valid access code has been entered.
This button is also used to silence information sounders, upon an information event.
The FUNCTION 2 button is fully programmable. Its default operation, is to carry out a
FUNCTION 2
lamp indicator test on the SmartCell control panel. This button only becomes active,
once a valid user access code has been entered.
©2021 EMS Ltd. All rights reserved.
SmartCell control panel
function
Page 12 of 28 TSD113-0001-99 (Issue 3) 19/05/2021 AJM