Fire Control Panel Leds - EMS SmartCell User Manual

Fire control panel LEDs

LED
indicator
FIRE ZONE
FIRE
INFORMATION ZONE
ALERT
DELAYS ACTIVE
SYSTEM FAULT
SOUNDER FAULT/DISABLED
GENERAL FAULT
GENERAL DISABLEMENT
IN TEST
POWER
COMMUNICATIONS;
ALARM TRANSMITTED
COMMUNICATIONS;
FAULT/DISABLED
COMMUNICATIONS;
HEALTHY
©2021 EMS Ltd. All rights reserved.
LED
colour
Illuminates when any device is in a fire alarm condition, to
indicate the zone that the device is located within.
Illuminates when any device is in fire alarm condition,
along with the associated FIRE ZONE LED.
Illuminates when any device is in an information alert
condition, to indicate the zone that the device is located
within.
Illuminates when any information device is in an alert
condition, along with the relevant INFORMATION ZONE
LED.
Illuminates when there are any delays programmed on
the SmartCell control panel.
Illuminates in the event of a fault occurring with the
SmartCell control panel's processor.
Illuminates when a fire sounder device is in a fault
condition, or has been disabled.
Illuminates when any fault condition is present, with a fire
device or the SmartCell control panel itself.
Illuminates when any fire type disablement is made on
the system.
Illuminates when a "TEST MODE" is initiated.
Indicates that the SmartCell control panel's 230Vac/24Vdc
supply is present.
Illuminates
communications module has transmitted an alarm signal.
lluminates
communications module has a fault condition or has
been disabled.
lluminates
communication module is connected and healthy.
Page 11 of 28
SmartCell control panel
function
when the SmartCell
when the SmartCell
when the SmartCell
TSD113-0001-99 (Issue 3) 19/05/2021 AJM
control panel's
control panel's
control panel's