How To Clear A Fire Event - EMS SmartCell User Manual

How to clear a fire event

THE SMARTCELL SYSTEM SHOULD ONLY BE OPERATED WHEN IT IS SAFE TO DO SO.
UPON THE REPORTING OF A FIRE EVENT, SYSTEM OPERATORS MUST ENSURE THAT THE
BUILDING'S FIRE EVACUATION PROCEDURES ARE FOLLOWED.
Once it has been established that it is safe to clear the fire event, the following steps must be taken:
1
The SmartCell
panel is in fire condition.
FIRE ZONES
FIRE
INFORMATION ZONES
ALERT
Z O N E S I N F I R E
0 1 : G r o u n d F l o o r
4
Silence the sounders by
pressing the
SOUND / SILENCE' button
ONCE.
ALARMS
SOUND/
SILENCE
If the fire event doesn't reset, your device is still in fire and will require clearing prior to resetting.
If a manual call point has been operated, ensure that the element has been reset with a reset key.
Should problems persist, contact your installer/maintenance company.
©2021 EMS Ltd. All rights reserved.
2
control
0 1
V i e w >
5
Reset the fire event, by
'ALARMS pressing the 'RESET' button.
Page 16 of 28
Press the 'SILENCE
BUZZER' button. The
panel should stop buzzing
SILENCE
BUZZER
RESET
TSD113-0001-99 (Issue 3) 19/05/2021 AJM
3
Either turn the enable
keyswitch, or enter a valid
user access code.
OR
Enter Code
6
The SmartCell
panel should now return
to the 'System Normal'
screen.
FIRE ZONES
FIRE
INFORMATION ZONES
ALERT
F i r e C o n t r o l P a n e l
S y s t e m N o r m a l
1 2 : 1 2 A c c e s s
control