Table of Contents
Advertisement
Connect to electrical main supply
as shown in Fig. 17
daNGer! Before you connect the pressure washer to the power source make
sure that the data on the rating plate are identical to the mains data.
If possible, do not use extension cords with this pressure washer; however, if you
must use one, it must comply with requirement mentioned in section of "iMpOrtaNt
saFety iNstrUCtiONs:
Insert the power cord into the socket.
switch on/off
CaUtiON! Put the high-pressure washer on a smooth ground. Stand in a secure and
stable position.
WarNiNG! Before switching on, ensure you have completely assembled the
high-pressure washer and connected all connections.
Fig.17
to switch on
as shown in Fig. 18 & 19
You should maintain the correct operating position every time you start the pressure
washer by placing one hand on the trigger handle handle and the other on the wand.
Y 2200BL indd 15
OPERATinG inSTRucTiOnS
Fig.18
15
15-4-29
6 32
Advertisement
Table of Contents
