Yard force YF2200BL Operator's Manual page 16

1. 1015psi;
2. 1305psi;
3. 1595psi;
4. 2200psi;
to select the desired pressure
Turn knob so the indicator mark aligns with the desired PSI setting.
how to make use of the power cord/hose/gun holder
as shown in Fig. 16-1&16-2
This pressure washer is equipped with 5 pieces of power cord/hose/gun holder. Each
of them consists of three parts ( support and lever, central pin),each lever also could
rotate 360 degree around its central pin clockwise or counter-clockwise, can stop in
any required position.
to rotate holder to specific position
Simply put your hand on the holder/bracket and move to the required position.
Two holders/brackets on the same side of the washer can be used together to store
the power cord/hose.
To tidy the power cord/hose quickly .
Rotate two holders so that raised lever can point outward at the same time. At this
moment, it will prevent power cord/hose from slipping off.
To remove the power cord/hose quickly.
Rotate two holders so that the raised lever can point inward at the same time.
At this moment, it allows the user to remove the power cord/hose easily off the
holder freely, which could save a lot of efforts.
Fig.16-1
In order to address it clearly. here take one holder as an
example .and rotate it clockwise.
Y 2200BL indd 14
To remove the power cord/hose
14
Fig.16-2
Rremove the
power
cord/hose
15-4-29 6 32