Related Manuals for Yard force EW N16
Summary of Contents for Yard force EW N16
- Page 1 EW N16 Q1W-SP02-2500 2500W HIGH PRESSURE WASHER Original Instructions READ & UNDERSTAND INSTRUCTION MANUAL Save all warnings and instructions for future reference.
- Page 2 Read this manual carefully prior to assembling and operating the pressure washer. It is dangerous to operate this product without being familiar with these instructions. Keep this manual in a safe place and have it ready for future reference.
- Page 3 <40 C(104...
-
Page 4: Table Of Contents
INTENDED USE EW U15 Original Instruction The machine is intended for cleaning the the outside walls, facades, terraces, footpaths, garden equipment, machinery, vehicles and tools. CONTENT If required, you can also use the machine with added household cleaning agents. The machine is to be used only for its prescribed purpose. Any other use is deemed to be a case of misuse. -
Page 5: General Safety Warnings
GENERAL SAFETY WARNINGS GENERAL SAFETY WARNINGS • WARNING: Water that has flowed through backflow • The electric supply connection should be made by a qualified electrician and comply with IEC 60364-1. It is preventers is considered to be non-potable. • WARNING: The machine should be disconnected recommended that the electric supply to this machine from its power source during cleaning or maintenance should include either a residual current device that... -
Page 6: Product Safety Warnings
PRODUCT SAFETY WARNINGS PRODUCT SAFETY WARNINGS WARNING! When using the product, the safety be kept dry and off the ground. It is recommended that this is accomplished by means of a cord reel which rules must be followed. For your own safety and that of others please read these instructions before keeps the socket at least 60 mm above the ground. - Page 7 PRODUCT SAFETY WARNINGS PRODUCT SAFETY WARNINGS • Always disconnect the product from the power supply: • If the cord becomes damaged during use, disconnect the cord from the supply immediately. DO NOT - When leaving the product unattended. - Before clearing a blockage. TOUCH THE CORD BEFORE DISCONNECTING THE - Before checking, cleaning or working on the SUPPLY.
- Page 8 PRODUCT SAFETY WARNINGS PRODUCT SAFETY WARNINGS injury and damage remain. The following dangers can Take the following points into account to minimise the arise in connection with the structure and design of vibration and noise exposure risks: this product: • Only use the product as intended by its design and •...
-
Page 9: Symbols
PRODUCT SAFETY WARNINGS SYMBOLS Overflow valve with pressure switch WARNING: Be sure to read and understand all The overflow valve prevents the permissible working safety instructions in this operator’s manual, pressure from being exceeded. If the lever on the trigger including all safety alert symbols such as gun is released the pressure switch turns turns the pump “DANGER”, “WARNING”, and “CAUTION”... -
Page 10: Technical Data
SYMBOLS TECHNICAL DATA Disconnect the mains plug immediately if the Input voltage rating 230 V~, 50 Hz cable is damaged, has been badly twisted or Input power 2500 W Working pressure 13.5 MPa is completely cut through. Also disconnect the Max pressure 17 MPa mains plug when the machine is left unattended. -
Page 11: Description Of Product
DESCRIPTION OF PRODUCT INSTALLATION Parts description (Fig. A) WARNING: Pull out mains plug before carrying out any work on the equipment and use only original parts. Spray gun Before starting any cleaning task, it is important to inspect the area for objects Gun holster that could create a hazard. -
Page 12: Installation
INSTALLATION OPERATION Assemble inlet adapter. (Fig. I) WARNING: Wear suitable clothing, ear and eye protection when working with the equipment. Ensure that the equipment is functional before each use. Ensure that the Attach the inlet adapter to the machine’s water inlet. Hand tighten only. mains voltage value matches the label on the equipment. -
Page 13: Maintenance And Storage
OPERATION MAINTENANCE AND STORAGE Overview of cleaning Hold the hand-held spray gun and the jet tube firmly with both hands. Unlock the safety button and press the trigger on the handheld spray gun. Clean the machine. Wipe the unit with a slightly damp cloth. Do not clean the machine The high-pressure pump starts running as soon as you operate the hand-held spray gun. -
Page 14: Troubleshooting
TROUBLESHOOTING TROUBLESHOOTING WARNING: Before performing any repair work, always ensure that the mains power Symptom Cause Solution cable has been unplugged. Detergent container is empty. Add more detergent. Detergent bottle or suction WARNING: Always wear heavy duty gloves when adjusting or cleaning, especially Check connections. - Page 15 Declare that the product: Declare that the product: Machine Description: 2500W High Pressure Washer Machine Description: 2500W High Pressure Washer Q1W-SP02-2500 / EW N16 Q1W-SP02-2500 / EW N16 Function: Clean the walls of buildings etc. Function: Clean the walls of buildings etc.