Table of Contents
Advertisement
Connect to water supply
as shown in Fig. 12 & 13
WarNiNG! Before carrying out actions below, make sure the ON/OFF switch is
on the OFF position.
WariNG! The pressure washer may not be connected directly to the potable
water supply. In this case, use an appropriate back-flow prevention device
conforming to the requirements of the American Society of Sanitary Engineers.
1. Connect the water supply hose to water supply.
2. Open the water inlet valve.
Y 2200BL indd 12
Fig.10
Fig.12
Fig.11
Fig.13
12
15-4-29
6 32
Advertisement
Table of Contents
