Yard force YF1600A1 Operator's Manual

Yard force YF1600A1 Operator's Manual

Electric pressure washer

Advertisement

OPERATOR'S MANUAL
Electric Pressure Wahser
English page 1
Version 1
QUESTIONS?
Our Customer Service staff is ready
to provide assistance. In the case
of a damaged or missing part, most
replacement parts ship from our facility.
For immediate help with assembly, or for
additional product information,
visit www.YardForceUSA.com or
email support@ForceToolsUSA.com
SAVE THIS MANUAL
FOR REFERENCE
You will need this manual for safety
instructions, operating procedures, and
Warranty. The original sales invoice is
required for warranty service.
Model/Modelo: YF1600A1
¿PREGUNTAS?
Nuestro personal de servicio al cliente está
listo para proveer asistencia. En el caso
de una parte dañada o faltante, la mayoría
de las piezas de repuesto se envían desde
nuestro centro.
Si necesita ayuda inmediata con el montaje,
o para obtener información adicional sobre
el producto, visite www.YardForceUSA.
com support@ ForceToolsUSA.com o
correo electrónico
GUARDE ESTE MANUAL
DE REFERENCIA
Usted necesitará este manual para
las instrucciones de seguridad, los
procedimientos operativos y de Garantía.
La factura de compra original se requiere
para el servicio de garantía.

Advertisement

Table of Contents
loading

Summary of Contents for Yard force YF1600A1

  • Page 1 Model/Modelo: YF1600A1 OPERATOR’S MANUAL Electric Pressure Wahser English page 1 Version 1 QUESTIONS? ¿PREGUNTAS? Nuestro personal de servicio al cliente está Our Customer Service staff is ready listo para proveer asistencia. En el caso to provide assistance. In the case de una parte dañada o faltante, la mayoría...
  • Page 2: Table Of Contents

    YF1600A1 Operator’s Manual TABLE OF CONTENTS Important safety instructions ..................2 Safety features .......................5 Parts and diagram list ....................6 Technical data ........................7 Assembly and operation instructions ................8 Machine assembly ....................8 Operation instructions ....................11 Cleaning detergent dispenser ................12 Shutting down and storage ..................14 Cleaning and maintenance ..................15...
  • Page 3: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS Please read all of the safety precautions before operating this machine every time. Please pay particular attention to all sections with following symbols. WARNING Could cause injury or death if not followed. CAUTION Could damage machine if not followed. WARNING When using this product, basic precautions should always be followed, including:...
  • Page 4 • Do not use acids, alkaline, solvents or any flammable material in this product. These products can cause physical injuries to the operator and irreversible damage to the machine. WARNING Risk of Electric Shock. • Inspect cord before using - do not use if cord is damaged. •...
  • Page 5: Ground Fault Circuit Interrupter Protection

    15. Do not spray electrical apparatus and wiring or the machine itself. 16. Do not operate the pressure washer with the inlet water filter screen removed. Keep filter clear of debris and sediment. 17. Discharge residual pressure by depressing the trigger until no more water comes out of the nozzle.
  • Page 6: Safety Features

    SAFETY FEATURES TOTAL STOP SYSTEM (TSS) The pressure washer is equipped with a total stop system (TSS) that will sense when the trigger on the gun is depressed or released. It will open the power circuit to the motor, and cause the pressure washer motor to stop. The motor will start again when the trigger is depressed.
  • Page 7: Parts And Diagram List

    PARTS AND DIAGRAM LIST PARTS AND DIAGRAM LIST Fig. 1 Check contents of the box As shown in Fig. 1 Carefully remove the pressure washer and parts from its packaging. Identify all the parts packaged in the carton against the parts list. Please contact our customer service center (Monday - Friday 8:30AM - 5:00PM ET) at (866) 902-9690 if anything is missing.
  • Page 8: Technical Data

    TECHNICAL DATA Model YF1600A1 Input voltage rating 120 V , 60 Hz Rated Power 13 A Working pressure 1600 PSI Max pressure 1750 PSI Rated Flow rate 1.20 GPM (275 LPH) Max. Flow rate 1.35 GPM (306 LPH) Inlet pressure 40~80 PSI Supply water temperature (max.)
  • Page 9: Assembly And Operation Instructions

    ASSEMBLY AND OPERATION INSTRUCTIONS Surface Preparation Before starting any cleaning task, it is important to inspect the area for objects that could create a hazard. Remove any objects from the work area that could be tripped over, such as toys or outdoor furniture. Ensure that all doors and windows are closed tightly.
  • Page 10 Fig. 4 Fig. 5 Green Black Turbo 25° Low pressure Rotating flush Used for Used for general clean detergent 3. Connect high-pressure hose to spray gun (Fig. 4) Attach high-pressure hose to the spray gun, tighten by hand until two parts are locked. 4.
  • Page 11 25° Low pressure Rotating flush Used for Used for general clean detergent This pressure washer is not intended to pump hot water. Never connect it to a hot water supply as it will significantly reduce the life of the pump. Fig.
  • Page 12: Operation Instructions

    OPERATION INSTRUCTIONS WARNING Risk of injury, Do Not Direct discharge stream at self or other persons. WARNING Before cleaning any surface, an inconspicuous area should be cleaned to test spray pattern and distance for maximum cleaning results. Fig.11 Turn ON the pressure washer by pressing the button with mark “ I ”. The unit will run for a few seconds to build up pressure, then will stop on the function of total stop system (TSS)(Fig.11).
  • Page 13: Cleaning Detergent Dispenser

    The pressure of spray on the surface will increase when you move the wand closer to the surface. Fig.13 Turn off the pressure washer by pressing the switch button with mark “ O ”, activate the safety latch for a break. For storage, drain machine after use by removing water connection, turning ON the machine for a few seconds and depressing gun trigger to release remaining water in the pump.
  • Page 14 Attach the low-pressure spray tip (black) for soap or detergent application. Detergent application will only work with low pressure spray tip. Remove the cap of detergent tank, fill tank with detergent or soap and replace the cap. Apply detergent as instructed by the detergent manufacturer (Fig. 15). Turn on the pressure washer.
  • Page 15: Shutting Down And Storage

    SHUTTING DOWN AND STORAGE (If you are not using detergent, go directly to Step 2.) When you have finished using the detergent dispensing system, fill detergent tank with clean water to rinse the system clean. Squezze the gun trigger for one minute at low pressure so that all detergent remaining in system are thoroughly flushed out.
  • Page 16: Cleaning And Maintenance

    CLEANING AND MAINTENANCE Water Filter Screen The pressure washer is equipped with a water inlet filter screen to protect the pump. If the screen is not kept clean, the flow of water to the pressure washer will be restricted and the pump may be damaged (Fig. 17). 1.
  • Page 17: Troubleshooting

    TROUBLESHOOTING Disconnect the machine from the power source before making any repairs. Symptom Cause Solution Motor does not run when On/Off switch is in the “OFF” Turn switch to the “ON” ( I “ON” ( I ), fully connected (O) position. ) position.
  • Page 18 Output pressure varies hOn/ Turn water on fully. Check Not enough inlet water Off switch is in the “OFF” (O) garden hose for kinks, leaks supply. position.igh and low. or blockage. Check that hoses and fit- tings are airtight. Turn OFF machine, and purge Pump is sucking air.
  • Page 19 Pump is noisy. Check that hoses and fittings are airtight. Turn off machine and purge Pump is sucking air. pump by squeezing trigger gun until a steady flow of water emerges through the nozzle. Remove water filter and Water filter is clogged. rinse in warm water.
  • Page 20: Warranty

    USA is not covered by any warranty. (1) Two-Year Warranty – Pump and Motor The YF1600A1 has a 2-Year Limited Warranty on the electric motor and water pump from the date of purchase against manufacturer defects for residential use only.
  • Page 21 RGA number clearly marked on the outside of the box will be refused. 5. All shipments must be sent pre-paid, Yard Force does not pay for any shipping costs for service or warranty evaluation. Yard Force is not responsible for any packages that are lost by carrier.

Table of Contents