Using Wps - ZyXEL Communications EMG8726-B10A User Manual

Thomas can now use the WPS feature to establish a wireless connection between his notebook and the
EMG (see Section 4.3.2 on page
EMG (see Section 4.3.3 on page

4.3.2 Using WPS

This section shows you how to set up a wireless network using WPS. It uses the EMG as the AP and a WPS-
enabled Android 4.4.2 smartphone as the wireless client.
to set up the wireless client settings:
Make sure that your EMG is turned on and your Android 4.42 smartphone is within the cover range of the
1
wireless signal.
Make sure WPS is enabled on the EMG. You can check it by logging into the EMG's Web Configurator
2
and see if it is enabled in the Network Setting > Wireless > Advanced screen. If not, select the WPS
checkbox for the 2.4G or 5G wireless network and then click Apply.
Note: When the MESH function is enabled (see
automatically enables WPS and grays the field out on this
Advanced
Chapter 4 Tutorials
42). He can also use the notebook's wireless client to search for the
44).
screen.
EMG6726/8726-B10A User's Guide
Section 7.7 on page
42
87), the EMG
Network Setting > Wireless >