ZyXEL Communications EMG8726-B10A User Manual page 43

You can either press the WPS button on the EMG's panel or click the Connect button for the
3
corresponding 2.4G or 5G wireless band in the Network Setting > Wireless > WPS screen.
Go to your phone settings and turn on Wi-Fi. Open the Wi-Fi networks list and tap WPS Push Button or the
4
WPS icon ( ).
Note: It doesn't matter which button is pressed first. You must press the second button within
two minutes of pressing the first one.
The EMG sends the proper configuration settings to the wireless client. This may take up to two minutes.
The wireless client is then able to communicate with the EMG securely.
The following figure shows you an example of how to set up a wireless network and its security by
pressing a button on both EMG and wireless client (the Android 4.4.2 phone in this example).
Chapter 4 Tutorials
EMG6726/8726-B10A User's Guide
43