ZyXEL Communications EMG8726-B10A User Manual page 88

3 Press the WPS button for more than five seconds on the EMG.
3
Or
Click Add Extender in the Multy Pro App. Install from Google Play or the Apple App store.
The following figure shows the Multy Pro application. Device Z is the EMG. Device A is a Multy-
Prosupported extender in AP mode. Devices B and C are Multy-Pro-supported extenders in repeater
Mode.
Figure 37 MESH Application
Click Network > Wireless > MESH. The following screen displays.
Figure 38 Network Setting > Wireless > MESH
The following table describes the labels in this screen.
Table 21 Network Setting > Wireless > MESH
LABEL DESCRIPTION
MESH Select Enable to activate MESH and have the EMG apply the wireless name, password, and
security type of the main 2.4G wireless network to the main 5G wireless network. A warning
displays when you select Enable (see
Note: When MESH is enabled, the following settings become not configurable:
•
•
•
Apply Click Apply to save your changes.
Cancel Click Cancel to restore your previously saved settings.
Chapter 7 Wireless
The Keep 2.4G and 5G WiFi network name the same setting in the Network Setting > Wireless
> WiFi and Network Setting > Wireless > WiFi > Edit screens.
The WPS setting in the Network Setting > Wireless > Advanced screen.
The ONE Connect setting in the Network Setting > Home Connectivity screen.
EMG6726/8726-B10A User's Guide
88
)
Figure 39 on page 89 .