Figure 5 Rear Panel
The following table describes the items on the rear panel.
Table 3 Panel Ports and Buttons
LABEL
Reset
LAN1 ~ LAN4
10G LAN
USB
Power
UPS
PHONE 1/2
PON
1.5.3 The WPS Button
You can use the WPS button to quickly set up a secure wireless connection between the Zyxel Device
and a WPS-compatible client by adding one device at a time.
To activate WPS:
Chapter 1 Introducing the Zyxel Device
DESCRIPTION
Press the button to return the Zyxel Device to the factory defaults.
Connect computers or other Ethernet devices to Ethernet ports for Internet access.
The USB port is reserved for future development.
Connect the power adapter and press the power button to start the device.
Connect a UPS (Uninterruptible Power Supply) to the UPS port to have a backup power source
when the main power fails.
Connect analog phones to the PHONE ports to make phone calls.
Connect the fiber optic cable to the PON port for Internet access.
PX7511-B0 User's Guide
22