ZyXEL Communications SBG5500 Series User Manual page 79

Figure 59 Dynamic DNS: Add/Edit
The following table describes the labels on this screen.
Table 20 Dynamic DNS: Add/Edit
LABEL
Enable
General
Profile Name
DDNS Type
DDNS Account
Username
Password
DDNS Settings
Domain Name
Primary Binding Address
Interface
Enable Wildcard Option
Enable off line Option (only
applies to custom DNS)
Chapter 5 WAN/Internet
DESCRIPTION
Select Enable to use this dynamic DNS.
When you are adding a dynamic DNS entry, type a descriptive name for this DDNS
entry in the SBG. You may use 1-32 alphanumeric characters, underscores(_), or
dashes (-), but the first character cannot be a number. This value is case-sensitive.
Select your Dynamic DNS service provider from the drop-down list box.
Type the user name used when you registered your domain name. You can use up
to 32 alphanumeric characters and the underscore. Spaces are not allowed.
Type the password provided by the DDNS provider. You can use up to 32
alphanumeric characters and the underscore. Spaces are not allowed.
Type the domain name you registered. You can use up to 256 alphanumeric
characters.
Select the interface to use for updating the IP address mapped to the domain
name.
Select the check box to enable DynDNS Wildcard.
Enable the wildcard feature to alias subdomains to be aliased to the same IP
address as your (dynamic) domain name. This feature is useful if you want to be able
to use, for example, www.yourhost.dyndns.org and still reach your hostname.
This option applies for custom DNS. Check with your Dynamic DNS service provider to
have traffic redirected to a URL (that you can specify) while you are off line.
SBG5500/3310 Series User's Guide
79