ZyXEL Communications SBG5500 Series User Manual page 102

Table 32 VLAN / Interface Group > Add/Edit
LABEL
#
Interface
Member
TX Tagged
VLAN Group(s)
Add
Remove
#
802.1q
Interfaces
WAN Interface Used In This Group
Add
Remove
WAN Type
WAN Interface
Automatically Add Clients
With The Following DHCP
Vendor IDs
Add
Edit
Remove
#
Criteria
Wildcard Support
OK
Cancel
6.7.1.1 WAN Interface Used In This Group: Add
Click Add in the WAN Interface Used In This Group table to display the following screen.
Chapter 6 LAN
DESCRIPTION
This shows the index number of the interface.
This shows the SBG LAN interfaces.
Select this check box to add the LAN interface to the group. Clear the Tagged
check box to add the LAN interface as an untagged member port.
A LAN interface can be added as an untagged member port of at most one group.
Ethernet LAN interfaces that have already been added as an untagged member
port of another group will have this check box disabled. It is still possible to add these
LAN interfaces to the group as tagged member ports.
Select this check box to add the LAN interface to the group as a tagged member
port.
Click this to add a new VLAN group.
Select a VLAN group and click this to delete it.
This shows the index number of the VLAN group.
This shows the VLAN ID number (from 1 to 4094) for traffic through tagged member
ports of this group. A VLAN ID cannot be assigned to more than one group.
This shows the LAN ports included in the VLAN group and if traffic leaving the port will
be tagged with the VLAN ID.
Click this to add a new WAN interface for an interface group.
Select a WAN interface and click this to delete it.
This field displays the current WAN connection type.
This field displays the current WAN interface.
Click Add to identify LAN hosts to add to the interface group by criteria such as the
type of the hardware or firmware.
Click this to add a new rule.
Select a rule and click this to modify it.
Select a rule and click this to delete it.
This shows the index number of the rule.
This shows the filtering criteria. The LAN interface on which the matched traffic is
received will belong to this group automatically.
This shows if wildcard on DHCP option 60 is enabled.
Click OK to save your changes.
Click Cancel to exit this screen without saving.
SBG5500/3310 Series User's Guide
102