Qos Policer: Add/Edit - ZyXEL Communications SBG5500 Series User Manual

Table 91 Network Setting > QoS > Policer Setup (continued)
LABEL
Rule
Action

11.5.1 QoS Policer: Add/Edit

Click Add in the Policer Setup screen or select a policer and click Edit next to a policer to show the
following screen.
Figure 150 Policer Setup: Add/Edit
The following table describes the labels in this screen.
Table 92 Policer Setup: Add/Edit
LABEL
Policer Setting
Enable
Name
Chapter 11 Bandwidth Management
DESCRIPTION
These are the rates and burst sizes against which the policer checks the traffic of the member
QoS classes.
This shows the how the policer has the SBG treat different types of traffic belonging to the
policer's member QoS classes.
DESCRIPTION
Select the check box to activate this policer.
Enter the descriptive name of this policer. You can use up to 31 alphanumeric characters, it must
begin with a letter. The valid characters are [0-9][a-z] [A-Z][_-].
SBG5500/3310 Series User's Guide
205