ZyXEL Communications SBG5500 Series User Manual page 220

Figure 157 Configuration > Log / Report > Log Settings > Edit (USB)
The following table describes the labels in this screen.
Table 101 Configuration > Log / Report > Log Settings > Edit (USB)
LABEL DESCRIPTION
USB Log Setting
Enable Select the check box to turn on the USB Log Setting.
Log Settings
Selection Use the Selection drop-down list to change the log settings for all of the log categories.
disable all logs (red X) - do not send the remote server logs for any log category.
enable normal logs (green check mark) - send the remote server log messages and alerts
for all log categories.
enable normal logs and debug logs (yellow check mark) - send the remote server log
messages, alerts, and debugging information for all log categories.
# This field is a sequential value, and it is not associated with a specific entry.
Log Category This field displays each category of messages. The Default category includes debugging
messages generated by open source software.
Selection Select what information you want to log from each Log Category (except All Logs; see
below). Choices are:
disable all logs (red X) - do not log any information from this category
enable normal logs (green check mark) - log regular information and alerts from this
category
enable normal logs and debug logs (yellow check mark) - log regular information, alerts,
and debugging information from this category
Chapter 13 Log / Report
SBG5500/3310 Series User's Guide
220