Page 2
IMPORTANT NOTICE PLEASE READ THE INSTRUCTIONS IN THIS MANUAL BEFORE INSTALLING THE PTC115 TRACKING CAMERA. DO NOT DISASSEMBLE OR MODIFY THE ITEMS BY YOURSELF. CONTACT THE DEALER FOR HELP WHEN THE ITEMS IS FAILED TO WORK. CONNECT THE DEVICES WITH PROPER CABLES.
Wide Area Mode ......................6 WEB SETUP ........................7 Make a Connection to PTC115 via Browser ..............7 Make a Connection to PTC115 via AVer IPCam Utility ..........9 Enable Tracking Function .................... 10 Setup Object Viewing Dimension ................11 Wide Area Mode ......................12 Setup Priority Zone ....................
Page 5
OSD SETUP ........................16 Before You Begin ......................16 For the First Time Use ....................16 Trigger OSD Menu ....................16 Setup IP Address..................... 17 OSD Tree Map ......................19 Main ........................19 Tracking ........................19 Camera ........................20 Camera ID ..................... 20 DHCP ......................
INTRODUCTION AVer PTC115 is a professional tracking camera which can be wide area, stage or segment mode depended on user’s subject target. The PTC115 use body motion and image analysis algorithm to tracking target; the target subject no need to wear any signal transmit device. The PTC115 can communicate with recording system through RS232, RS485 or network interface.
Product Overview 8 9 10 1. PTZ camera 6. 3G-SDI 1 port(PTZ view) 2. Panoramic camera 7. HDMI port(PTZ view) 3. Power indicator 8. Video in port 4. RJ-45 port 9. RS-232 port 5. 3G-SDI 2 port(Panoramic view) 10. Power jack Dimension...
7. Zoom in/out 8. Exposure compensation 9. Back to zero position(home preset) [Note] Press and hold 3 seconds to turn on or turn off the PTC115 unit. Only support at PTC115 FW version 0.0.1000.08 and above. 10. Tracking on/off 11. Number buttons 12.
This mode is easily affected by the brown objects or the color similar to skin. Things like cartons and wood furniture. It should be used in bright environment. If the light is not enough, it will cause PTC115 unable to distinguish the target face and lead to the tracking failure. ...
WEB SETUP Make a Connection to PTC115 via Browser 1. Find the IP address of PTC115: call out OSD menu of PTC115. Use ▲ and ▼ buttons on remote controller to go to “Information” to find the IP address information.
Page 13
After login, User should see the main interface of PTC115.
Make a Connection to PTC115 via AVer IPCam Utility [Note] The PTC115 FW version 0.0.1000.08 and above supports IPCam Utiltiy application. To find the IP address of your cameras, you can execute the IPCam Utility installer. Follow the below steps to find the IP address of camera.
Setup Object Viewing Dimension Set the size of tracking object on the screen. Aim the intersection of blue line can get best curacy of tracking. The illustration shows the minimum request. Set the person proportion more than the illustration. If target proportion is smaller than the photo, it may cause the tracking failure. 1920 1080 To set the object size for tracking select...
Setup Priority Zone If PTC115 detects motions in the defined zone and PTC115 will be triggered to track. If priority zone doesn’t setup, then, all the panoramic view will be the default active zone. [Note] The screen of priority zone setting is based on panoramic camera view.
Setup Shielded Zone Define the area that user doesn’t want camera to track. The shield zone should be within the active zone. 8 shield zones can be set. [Note] The screen of shielded zone setting is based on panoramic camera view. 1.
Preset Setup Define the specific location to view when select preset number (1~255). When PTC115 lose tracking, it will back to the preset 1 position. 1. Open the browser and enter the IP address of PTC115 to login to PTC115.
Using RTSP Connect to Camera Use RTSP player connecting to camera; please enter the following RTSP URL in your application such as VLC, PotPlayer, or QuickTime. PTZ camera: rtsp:// IP address of PTC115:554/live_st1 For example: rtsp://192.168.1.1:554/live_st1 Panoramic camera: rtsp://IP address of PTC115:8554/live_st2...
OSD SETUP Before You Begin Make sure all connections are connected successfully before using the PTC115. Connections error will cause no image showing or no reaction. (For more information, please refer to INSTALLATION chapter.) For the First Time Use Trigger OSD Menu button on remote controller to call out OSD menu.
Setup IP Address Setup IP address of PTC115. There are two ways to setup IP address of PTC115. Please follow the steps below to setup the IP address. Static IP Address Assign a fix IP address for PTC115. 1. After starting-up, press button on remote control to call out OSD menu.
Page 23
3. Use ▲ and ▼ buttons go to “Information” to check the IP address information.
Factory Default > Information > Tracking User can enable or disable auto-tracking. PTC115 will not track on object automatically when the feature is disabled. To enable auto-tracking, please select “On”. To disable auto-tracking, select “Off”. Tracking Camera >...
> Factory Default > Information > Camera ID To change camera ID, please select Camera > Camera ID. Tracking Camera > Camera ID > PTC115 Video Format > DHCP > Advanced Setting > Static IP > Preset > PTZ Camera >...
Static IP To setup network as a static IP, select Camera > Static IP (Please set DHCP off before the Static IP setting) Tracking Camera > Camera ID > Video Format > DHCP > Advanced Setting > Static IP > IP 10.1.0.1 >...
PTZ Camera To adjust the parameters of PTZ camera, select Camera >PTZ Camera. Tracking Camera > Camera ID > Video Format > DHCP > Advanced Setting > Static IP > Preset > PTZ Camera > Language > Camera Mode Full Auto >...
Page 28
Camera Mode There are 4 modes of camera mode, you can select one from Camera > PTZ Camera > Camera Mode. Camera Mode Full Auto > Full Auto > Slow Shutter Full Auto > Shutter Priority > Maximum Gain 24dB Shutter Priority >...
Page 29
White Balance To adjust white balance value, select Camera > PTZ Camera > White Balance. Camera Mode Full Auto > Full Auto > Shutter Priority > Iris Priority > Manual > White Balance > Mode Auto Shading Correction > Auto Pan/Tile Speed One Push Zoom Speed...
Shading Correction To adjust shading correction, select Camera > PTZ Camera > Shading Correction (The option is for the screen corner shadow fixing.) Camera Mode Full Auto > Full Auto > Shutter Priority > Iris Priority > Manual > White Balance >...
Page 31
PIP Mode Select picture-in-picture(PIP) mode. To turn off the PIP mode, select mode 0. Tracking Camera > Video Format > 3G-SDI1/HDMI Auto Advanced Setting > 3G-SDI2 Auto Preset > Language > Profile > Factory Default > Information >...
> Information > Preset PTC115 allows you to set 10 preset locations via remote controller. To set up preset point: 1. Enter OSD and turn off the tracking function. 2. Move camera to the prefer location and zoom distance.
Vietnamese Profile PTC115 allows you to save 5 profiles. To set the profile, go to OSD menu > Set and use arrow key to assign a number and press enter button. To call the profile, go to OSD menu > Apply and use arrow key to call an assigned number and press enter button.
Factory Default To reset the PTC115 to default setting, go to OSD menu > Factory Default > Yes and press enter button. Tracking Camera > Video Format > Advanced Setting > Preset > Language > Profile > Factory Default >...
When the hot key takes effect, you will see “tracking on” or “tracking off” on the right bottom side. Enable/Disable AVer Logo Press six times(666666) When the hot key takes effect, you will see “AVer” logo on the right bottom side. Show the tracking indicator Press seven times(7777777) When the hot key takes effect, you will see the tracking indicator on the target face.
6. What about Preset 2 ~9 are used for anything related to tracking? If you turn off tracking, PTC115 is a regular PTZ. User can manipulate it to assign position via center control system command. The other presets are these usages.