Advertisement
Quick Links
CAM340+ Quick Start Guide
Package Contents
Power Adapter
CAM340+
(for USB 2.0)
Tripod screw
Warranty Card
Overview
4
1
2
3
7
P/N: 300AU310-???
Quick Start
USB cable
Guide
5
1. Lens
(Max. viewing angle 120°)
2. IR receiver
3. Status light
4. Microphone
6
5. Kensington slot
6. Mount clip
7. Tripod screw hole
8. RESET pin
9. USB type-C connector
10. DC power jack
8 9 10
Setup CAM340+
1. Install the CAM340+ on top of TV or on a tripod.
2. Connect CAM340+ to PC with provided USB cable. If you like to use type-C connector
on newer PC, connect your adapter to USB cable, and then connect type-C side of
adapter to PC.
3.
If you connect CAM340+ to USB2.0 port on PC, please connect provided power
adapter to CAM340+ and wall when a warning (As figure shown) is displayed on PC.
[Note] The warning message display time is short.
OR
USB type-A to
type-C adapter
(optional)
USB 3.0
or
USB 3.0
or
Laptop
USB 2.0
(1080P)
Advertisement
Related Manuals for AVer CAM340+
Summary of Contents for AVer CAM340+
- Page 1 CAM340+ Quick Start Guide Setup CAM340+ Package Contents 1. Install the CAM340+ on top of TV or on a tripod. Power Adapter Quick Start CAM340+ USB cable (for USB 2.0) Guide Tripod screw Warranty Card ...
- Page 2 Click on it to accept the plug-in; your video application can now be control by AVer PTZApp and remote control. 2. During your video call, you can use the AVer PTZApp to pan, tilt and zoom the camera in/out and enable/disable the backlight feature, set up camera brightness and Laptop ...
- Page 3 Enable hotkey control to use keyboard control camera’s movement and backlight function. Please go to http://www.aver.com/download-center to download the AVer EZLive software. 1. Select “Settings” After downloading, double-click on the file and follow the on-screen instructions to complete 2. Set Hotkey Control to “On”.
- Page 4 If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user *Function requires AVer PTZApp is encouraged to try to correct the interference by one of the following measures: **Not support for CAM340+ - Reorient or relocate the receiving antenna.
Need help?
Do you have a question about the CAM340+ and is the answer not in the manual?
Questions and answers