AVer DL30 User Manual
Hide thumbs Also See for DL30:

Advertisement

DL30/DL50
User Manual

Advertisement

Table of Contents
loading

Summary of Contents for AVer DL30

  • Page 1 DL30/DL50 User Manual...
  • Page 2 Federal Communications Commission Statement NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro -vide reasonable protection against harmful interference when the equipment is operate din a commercial environment.
  • Page 3 COPYRIGHT ©2021 AVer Information Inc. All rights reserved. All rights of this object belong to AVer Information Inc. Reproduced or transmitted in any form or by any means without the prior written permission of AVer Information Inc. is prohibited. All information or specifications are subject to change without prior notice.
  • Page 4 WARNING  To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. Warranty will be void if any unauthorized modifications are done to the product.  Do not drop the camera or subject it to physical shock. ...
  • Page 5 AVer Information Inc. https://www.aver.com 8F, No.157, Da-An Rd., Tucheng Dist., New Taipei City 23673, Taiwan Tel: +886 (2) 2269 8535 European Headquarters AVer Information Europe B.V. https://www.avereurope.com Westblaak 140, 3012KM, Rotterdam, Netherlands Tel: +31 (0) 10 7600 550 Technical support: eu.rma@aver.com...
  • Page 6: Table Of Contents

    Contents Package Contents....................1 Camera Mount Suggestions (Optional Accessories) ......... 1 Product Introduction ....................2 Overview ......................2 LED Indicator ..................... 2 Pan and Tilt Angle ....................3 Dimension ......................3 Cable Fixing Plate Installation ................4 Device Connection..................... 5 PoE+ Connection ....................
  • Page 7 If there is DHCP environment ..............13 Or if you want to configure by yourself ............ 13 Web Setup ....................... 14 Use the AVer IPCam Utility to Find the Camera ..........14 Make a Connection to the Camera via Browser ..........15 Live View......................16 Snapshot ....................
  • Page 8 Preset ....................... 24 Exposure ....................25 Image Process ..................25 Video & Audio ................... 26 Network ....................27 System ..................... 28 FAQ ........................29 Specification* ......................30 DL30 ........................ 30...
  • Page 9: Package Contents

    Package Contents Power Adapter & Power Camera Unit Cable Fixing Plate Cable Ties (x4) Cord M2 x 4mm Screws Quick Start Guide Remote Control USB Cable (x2) 1/4”-20, L=7.5mm User Manual* Warranty Card* Screw *Only for Japan Camera Mount Suggestions (Optional Accessories) For details on optional accessories, consult your local dealer.
  • Page 10: Product Introduction

    (3) LED Indicator (6) HDMI Port** (9) PoE+ Port*** *Line input level: 1Vrms (max) *Mic input level: 50mVrms (max); Supplied voltage: 3.3V **DL30 does not support HDMI port. ***Only support IEEE 802.3at PoE+ standard. LED Indicator Status Blue (Blinking every 2 seconds)
  • Page 11: Pan And Tilt Angle

    Pan and Tilt Angle ±90° ±170° Dimension 200mm (7.87”) 158.8mm (6.25”) 162.2mm (6.39”)
  • Page 12: Cable Fixing Plate Installation

    Cable Fixing Plate Installation [Note] DL30 does not support HDMI port.
  • Page 13: Device Connection

    Laptop/Desktop (Management/Presentation) Microphone Audio Input Monitor/TV PoE+ IEEE802.3at (Display) Lecture Capture System HDMI (Not for DL30) (Record) DL Tracking Camera Web Application PTZ Management (Remote Management) PoE+ Connection Connect the camera to the router or switch through the PoE+ port.
  • Page 14: Hdmi Connection

    Monitor/TV [Note] DL30 does not support HDMI port. HDMI monitor can be connected to camera and output live video. Assuming HDMI monitor is well connected before the camera is turned on, the OSD menu will be displayed on HDMI monitor in...
  • Page 15: Audio Input Connection

    Audio Input Connection Connect the audio device for audio receiving. [Note] Line input level: 1Vrms (max) Mic input level: 50mVrms (max); Supplied voltage: 3.3V Because video conferencing software such as Google Hangouts (Windows), Skype (Mac), or Teams (Windows and Mac) can automatically adjust volume, the user might experience randomly unstable volume while using the camera.
  • Page 16: Ceiling Mount Installation (Optional)

    Ceiling Mount Installation (Optional) Use two M2 x 4mm screws (in the DL camera package) to secure the cable fixing plate (in the DL camera package) to the camera. Plug in cables. Use four cable ties (in the DL camera package) to secure the cables and cable fixing plate.
  • Page 17: Wall Mount Installation (Optional)

    Wall Mount Installation (Optional) Use two M2 x 4mm screws (in the DL camera package) to secure the cable fixing plate (in the DL camera package) to the camera. Plug in cables. Use four cable ties (in the DL camera package) to secure the cables and cable fixing plate.
  • Page 18 After assembling the L-mount brackets, use the screws (not included) to secure the lower part of L-mount brackets on the wall. [Note] For cement wall: M4 x 20mm self-tapping screws (x2) + plastic conical anchor For wooden wall: M4 x 20mm self-tapping screws (x2) Pass the cables through the hole on the L-mount brackets and connect the cables to corresponding connection ports.
  • Page 19: Tracking Setup

    Tracking Setup • Distance range to podium: 8~9m is suggested. • Tracking distance for upper body: 2~16m; tracking distance for full body: 3~28m. • Suggested setup position: center of classroom. • Install height range (from floor): 2~3m; 2.4m is suggested. •...
  • Page 20: Remote Control

    It will be on when pressing other (2) Remote Control LED buttons. Open and exit the OSD menu. (3) Menu [Note] DL30 does not support OSD menu. Switch from presenter to another (4) Switch presenter. Turn on auto tracking.
  • Page 21: Hot Key

    CAM1 to CAM4 buttons. Select a camera to operate. Once a camera is (17) Camera Select selected, the CAM button LED will be on when pressing other buttons. Hot Key Press certain button on remote controller to perform hot key function. Button Action Function...
  • Page 22: Web Setup

    Web Setup Connect the camera from a remote site through the internet. Use the AVer IPCam Utility to Find the Camera To find the IP address of your cameras, you can execute the IPCam Utility installer. Follow the below steps to find the IP address of the camera.
  • Page 23: Make A Connection To The Camera Via Browser

    Make a Connection to the Camera via Browser Open the browser and enter the IP address of the camera. The PC/laptop requires an internet access. After connecting to the camera, enter the user account and password (default is admin/admin) to log in Web.
  • Page 24: Live View

    Live View In live view, the user can make a snapshot, set up camera control (zoom in/out, camera direction control, pan/tilt speed, focus), view preset, and tracking control (on, off, tracking mode). Snapshot Select the camera button to make a snapshot and download the file to local storage.
  • Page 25: Pan-Tilt-Zoom Control

    Pan-Tilt-Zoom Control To operate the PTZ Camera motion, use to adjust the camera view position and use to zoom. Select to go back to default position. Manual Pan-Tilt Speed Adjustment Adjust the speed of manual Pan-Tilt. [Note] The max manual pan speed is 90°/sec. The max manual tilt speed is 45°/sec.
  • Page 26: Focus

    Focus Switch to auto (AF) or manual (MF) focus. The manual focus use “+” and “–” to adjust focus. Select “+” to adjust focus to the far end and focusing on a far subject; select “-” to adjust focus to near end and focusing on a near subject. One push focus: By clicking the button to adjust Lens focus automatically once.
  • Page 27: Tracking Control

    Tracking Control Enable/disable tracking function, select tracking mode, and operate one-click tracking function.  Tracking mode (refer to Tracking Settings section for setup)  Presenter: Camera will start tracking when object enters the tracking point. [Note] Tracking point under presenter mode: default set is preset 1.
  • Page 28: Settings

    Settings Tracking Settings Enable/disable tracking function, set up tracking mode, operate one-click tracking function and pan/tilt/zoom the camera. [Note] Tracking will be off when activating pan/tilt/zoom function. Tracking Control Enable/disable tracking function, select tracking mode, operate one-click tracking function (refer to Tracking Control section), and pan/tilt/zoom the camera.
  • Page 29: Presenter

    Presenter Select the “Presenter” tab in Tracking Settings interface. Camera will start tracking when object enters the tracking point. 1. Use to adjust the camera to tracking point. 2. Then, select Save to Preset 1 to save the tracking point. 3.
  • Page 30: Zone

    Zone Select the “Zone” tab in Tracking Settings interface. Set up 2 to 4 block areas for the camera. Each block is corresponding to one preset position. Camera will switch between preset positions when the presenter enters different blocks. 1. Select the “Number of block” (2, 3, or 4).
  • Page 31 2. Select the block and set the preset positions in order (preset 6 to preset 9). Use to move the camera to wanted position and select “Save” to save the preset position. And, a snapshot of the preset image will show at corresponding image display box.
  • Page 32: Camera Settings

    Camera Settings Camera Control The user can set up camera control (zoom in/out, camera direction control, focus, pan/tilt/zoom speed), and enable/disable digital zoom function. Preset Set up preset position and view preset position. 1. Select the “Preset” tab in Camera Settings interface. 2.
  • Page 33: Exposure

    [Note] Preset point value includes: pan/tilt/zoom, exposure, shutter, iris, ev, brightness, gain, slow, shutter, white balance, focus, focus position, digital zoom, and R&B gain. Exposure Select the “Exposure” tab in camera settings interface. Set up the exposure type - Full Auto or Manual and relevant settings. [Note] If IFP seems blurry in live view, please set up web setting as following: Camera Settings >...
  • Page 34: Video & Audio

    3 types of video modes can be selected and each one only supports single function,  Stream Only: supports RTSP/RTMP only.  USB Only (factory default): supports USB port output only; not compatible with AVer PTZ Management and PTZ Control Panel. Please switch to other two modes if necessary.
  • Page 35: Network

    Network Set up IP address of camera – DHCP or static IP, Netmask, Gateway, and DNS. After setting, select “Confirm” to apply settings. Follow below steps to set up RTMP: Get the RTMP server URL and stream key from the broadcasting platform and enter in “Server URL”...
  • Page 36: System

    The system information of camera is displayed in this page, including Model Name, IP Address, Serial Number, MAC Address, and Firmware Version.  Upgrade firmware: follows below steps to upgrade the firmware. 1. Download the newest firmware from https://www.aver.com/download-center (Global & European Headquarters) or https://www.averusa.com/education/support (USA).
  • Page 37: Faq

    Can I pan, tilt, zoom, and preset when tracking is on? Yes, but tracking will be off when activating pan/tilt/zoom function. Any value will be auto saved and shifted when going to the preset point? Yes, preset point value: PTZ, exposure, shutter, iris, ev, brightness, gain, slow shutter, white balance, focus, focus position, digital zoom, R&B gain.
  • Page 38: Specification

    Specification* DL30 Camera 1/2.8” CMOS Image Sensor Effective Picture Elements 2 Megapixels USB: 1080P60 (max) Output Resolutions RTSP: 1080P60 (max) Minimum Illumination 0.5 Lux (IRE50, F1.6, 30FPS) ≥ 50dB S/N Ratio Gain Auto, Manual TV Line 800 (Center/Wide) 1/4 s to 1/10,000 s (60Hz)
  • Page 39 Preset Positions 10 (IR), 256 (IP) Camera Control - Interface IP, USB Camera Control - Protocol VISCA (IP), CGI (IP), USB Noise Reduction 2D/3D NR Image Effect Flip, Mirror Power Frequency 50 Hz, 60 Hz AI Auto Tracking Functions Tracking Mode Presenter Mode, Zone Mode Sleep Mode Sleep Mode...
  • Page 40 Security Kensington slot Temperature: 0°C to +40°C Operating Conditions Humidity: 20% to 80% Temperature: -20°C to +60°C Storage Conditions Humidity: 20% to 95% IP Streaming Resolution 1080P (60FPS) Network Video Compress H.264, MJPEG (Web Page) Formats Maximum Frame Rate 60FPS Bit-rate Control Modes VBR/CBR Range of Bit-rate Setting...
  • Page 41 Exposure/White Balance/Picture Network Configuration DHCP, IP Address, Gateway, Subnet mask, DNS Software Tools Single Camera Control AVer CaptureShare (via USB), AVer PTZ Control Panel (via IP) Multi-Camera Control and AVer PTZ Management (via IP) Configuration AVer CaptureShare/Information Device IP Searching...

This manual is also suitable for:

Dl50

Table of Contents