Rim Geometry Diagnostics; Connection To The Company's Computer Network - Fasep TOP AUTOMATIC 4.0 Operating And Maintenance Manual

Code DOC. UM TOP AUTOMATIC 4.0
OPERATING AND MAINTENANCE MANUAL
Rev. 6
RASE.TOP.4028
Page 69 of 86
5.5.2 – Rim geometry diagnostics
The tyre changer is able to detect rim geometry defects during bead breaking. More specifically,
by enabling the 'DIAG' (Diagnostics) key on the touch screen panel, the upper and lower bead
breakers detect rim geometry defects during a complete 360-degree rotation of the self-centring
unit. Rim geometry defects are detected by the lower bead breaker ('Fault Z') and/or by the upper
bead breaker ('Fault Y') (Fig 1) against a reference 'Diagnostic Offset' value (in mm) chosen by
the operator.
Figure 31 – 'Diagnostic' Window

CONNECTION TO THE COMPANY'S COMPUTER NETWORK

The machine can be connected to the company's computer network using the Ethernet port on
the back of the machine (Fig. 32).
Network connection makes it possible for users to monitor the operation of the machine from a
remote location and for the manufacturer to provide remote assistance and/or remote
maintenance.
Figure 32 – Ethernet port
69