Remove The Battery - XAC XCL AT-150 Series Installation Manual

8. R
EPLACE THE

8-1 REMOVE THE BATTERY

STEP 1: Push the battery latch to pull the battery from AT-150 as Figure 8.
STEP 2: After removing the battery as below Figure 9 to change a new battery.
8-2 INSTALL THE BATTERY
STEP 1: Insert the battery connector into AT150 as Figure 10.
STEP 2: After install the battery and press the battery latch gently as Figure 11.
Figure 10
B
ATTERY
Figure 8 Figure 9
Figure 11