XAC XCL AT-150 Series Installation Manual page 7

Hide thumbs Also See for XCL AT-150 Series:
Table of Contents

Advertisement

Bottom Cover Removal Warning
When removing the bottom cover and screws for the purposes of changing battery, remember to
put back the cover and screws before power on the POS.
CAUTION:
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED
BATTERIES ACCORDING TO THE INSTRUCTIONS.
Warning for internal battery pack
To reduce risk of fire or burns:
1.
Do not attempt to open, disassemble, or service the battery pack.
2.
Do not crush, puncture, short external contacts, or dispose of in fire or water.
3.
Do not heat above 60
Installing the battery
1.
After install the battery, please make sure the battery is fitted properly into the battery
compartment.
2.
Please do the full charge (0% ~ 100%) once to get the best battery performance after
battery replacement.
Note: The battery is considered a consumable item and excluded from XAC's Product Warranty.
9. I
SAM/SIM
NSERT
After removing the battery, the user can find SAM*2 (left) slots and SIM*2(right) slot at
the bottom side of device. Please insert the card correctly as the icon shown on the cover
as Figure 12:
o
C
CARD
Figure 12

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xcl-at-150-r6-18uXcl-at-150-r6-18e

Table of Contents