10
Disabling Pop-Out Function (optional)
To prevent interface arms from popping out, fully insert and tighten the M6 x 35mm screws
( part 13) at the padlock* symbol at the bottom of the interface arms (parts 9 & 10).
9
*
Note: Dimensions are based on using
the BT8390-VESA400MAP with a
BT8390 rail and BT8390-WFK1.
Depth dimensions may change
if different brackets are used.
10
15
13
RECESS MOUNTING
Unlocked Position
Locked Position
part 13 fully inserted
Do not fully insert part 13 when interface arms are popped out.
13
13
17