TA Instruments TGA5500 Getting Started Manual page 42

are found in the accessory kit. For now, leave the sample hang-down wire in its case.
Figure 24 Sample hang-down wire installation tool.
9 Position the hang-down wire case so that the wire's double bend hook is at the top.
10 With the sample hang-down wire still in its case, insert the bottom of the wire into the sample hang-
down installation tool, as shown below. Then remove the installation tool and wire from the case.
Figure 25 Inserting sample hang-down wire into installation tool.
11 Remove the flat object covering the furnace opening and lower the furnace to its fully open position.
Discovery TGA™ Getting Started Guide
Double bend hook
Installation tool
Page 42