Advertisement
7
Alarms and working status
Explanation of status LEDs displayed on Wi-Fi Box.
LED
LED
green
red
Alarm codes indicated on the
BeSMART display and
suggested corrective actions.
More info and technical support on the following website:
www.besmart-home.com
Status
Relay = bridged (only with ON/OFF installation)
Relay = open (only with ON/OFF installation)
OT-bus connection = OK (only with OT connection)
Boiler alarm (only with OT connection)
Network or RF error
WPS mode in progress (press and hold WPS button) – wait WPS signal
WPS signal detected
SmartLink mode in progress (press SmartLink button once)
RF encoding in progress (press and hold the Wi-Fi LED button)
Err
Radio frequency error.
Temperature sensor broken.
(Batteries/distance)
(not reparable)
LED
= fixed ON
= flashing fast (0.5 secs)
= flashing slow (1 secs)
E82
E83
NO OT-bus communication.
(check connections)
E84
A01....99
Hardware problem.
Boiler alarm.
(not reparable)
(refer to boiler manual)
BeSMART is a RIELLO GROUP brand
Via Ing. Pilade Riello, 7
37045 Legnago - Italy
Advertisement
