Advertisement
Preparation
2
Before installation
Refer to the appliance manual to ensure that the BeSMART thermostat is compatible with your
•
boiler
The BeSMART wireless thermostat can be installed almost everywhere within the home, however
•
please refer to the adjacent diagrams for guidance when deciding on a suitable location.
The BeSMART thermostat can also be used to replace an existing hard-wired thermostat (please
•
check appliance manual to ensure compatibility).
Switch off and isolate the appliance and any external controls from the electrical supply, before
•
carrying out the installation.
Tools required for the installation
Phillips screwdriver
•
Small flat blade screwdriver
•
Combination pliers
•
Do not install above heat sources
Avoid draughty areas
Avoid direct sunlight
Install at the correct height
Advertisement
