Advertisement
3
A
If necessary remove the old thermostat.
Attention: The BeSMART thermostat is a wireless
control. Isolate any redundant wiring and ensure it
does not interfere with the fitment of the BeSMART
control. If its intended to re-use any existing wiring; you
should refer to the appliance manual to ensure
compatibility .
BeSMART Installation
Fix the wall plate to the wall
using the supplied screws.
(screw head inside proper
location)
Separate the BeSMART from the wall plate.
Hard-wired installation
If using as a hard-wired control; connect the respective wiring to
the relevant terminals on the BeSMART control.
Attention: Please refer to the appliance
installation manual and the BeSMART
manual for specific information on hard-wired
connections.
TA
ON/OFF
Advertisement
