Removing the Palmrest Module/Upper Cover
1. Perform the
"External Module Disassembly
to 3-20.
2. Use a non-marring plastic scribe to remove the rubber pads from the left and right foot
stands.
Figure 3-25. Rubber Pads for the Top Corner Screws
3. Remove the base side screws securing the upper cover.
Figure 3-26. Upper Cover Screws – Base Side
Table 3-9. Screw
Step
Upper Cover Disassembly
3-22
Process" procedures described on pages
Screw
M2 × L3 (Green)
M2.5 × L7 (Blue)
M2.5 x 2.5 (Red)
Quantity
Screw Type
7
13
2
Machine Maintenance
0
3-8