Table of Contents
Advertisement
10. Disconnect the DC input cable from the mainboard.
Figure 3-52. DC Input Cable
11. Carefully remove the mainboard out of the lower case and make sure the DC input cable
is remove as well.
Figure 3-53. Mainboard Remove
NOTE:
NOTE:
A circuit board that is >10 cm2 has been highlighted with a yellow rectangle in
Figure
3-53. Follow the local regulations for disposing this type of circuit board.
NOTE:
NOTE:
The RTC battery has been highlighted with a yellow circle in
RTC battery and follow the local regulations for disposing it.
3-36
Figure
3-53. Detach the
Machine Maintenance
Advertisement
Table of Contents
