Table of Contents
Advertisement
3. Connect the main and auxiliary antenna cables to the WLAN module.
IMPORTANT:
The main antenna cable (black) should be attached to connector near the
module screw; the auxiliary antenna cable (white) should be attached to the
connector near the lower case cable opening.
Figure 3-136. WLAN Module Antennas
4. Replace the WLAN module cover and secure it with a screw.
Figure 3-137. WLAN Module Cover
Table 3-35. Screw
Step
WLAN Module Cover Assembly
3-86
Screw
M2 × L4
Quantity
Screw Type
1
Machine Maintenance
Advertisement
Table of Contents
