Acer TravelMate 6495T Service Manual page 58

Table 2-2. BIOS Main (Continued)
Parameter
Quiet Boot
Network Boot
F12 Boot Menu
D2D Recovery
SATA Mode
WiFi
Card Reader
Wired LAN
Audio
Finger Printer
USB Ports
ODD
Express Card
Power Off USB
Charge (S3/S4/S5)
Battery Threshold
(in DC mode)
2-6
Description
Show the original equipment manufacturer
(OEM) screen during system boot instead of
the typical POST screen
Option to boot system from LAN
Option to enter the Boot menu during POST
Option to use the D2D Recovery function
Option to set the SATA controller mode
Option to enable the Wi-Fi device.
Option to enable the multi-function card reader
device.
Option to enable the wired LAN device.
Option to enable the audio device.
Option to enable the finger printer device.
Option to enable the external USB ports.
Option to enable the ODD device.
Option to enable the express card device.
Option to enable the system to charge USB
devices while the system enters into Suspend
to RAM (S3), Hibernation (S4), or power off
(S5) mode.
Option to set battery threshold.
Format/Option
Option: Enabled or
Disabled
Option: Enabled or
Disabled
Option: Enabled or
Disabled
Option: Enabled or
Disabled
Option: AHCI or IDE
Option: Enabled or
Disabled
Option: Enabled or
Disabled
Option: Enabled or
Disabled
Option: Enabled or
Disabled
Option: Enabled or
Disabled
Option: Enabled or
Disabled
Option: Enabled or
Disabled
Option: Enabled or
Disabled
Option: Enabled or
Disabled
Option: 10%, 20% or
30%
System Utilities