Removing the Palmrest Module/Upper Cover
1. Perform the
2. Perform the
3. Open the connector latch for the click button (rubber dome) cable (1), and then disconnect
the cable (2).
4. Open the connector latches for both the fingerprint board and touchpad cables (1), and
then disconnect the cables (2).
Machine Maintenance
Downloaded from
www.Manualslib.com
"External Module Disassembly
"Removing the
Keyboard" procedure described on the preceding section.
Figure 1-29. Click Button (Rubber Dome) Cable
Fingerprint
board cable
Figure 1-30. Fingerprint Board and Touchpad Cables
manuals search engine
Process" procedure described on page 3-8.
Touchpad
cable
0
3-25