Removing the Palmrest Module/Upper Case
1. Perform the
"Removing the Base
2. Perform the
"Removing the HDD
3. Perform the
"Removing the WLAN
4. Perform the
"Removing the DIMM
5. Perform the
"Removing the
6. Release the RD1 connector latch (1), then disconnect the cable from the mainboard (2).
Figure 3-22. RD1 Board Cable
7. Release the touchpad connector latch (1), then disconnect the cable from the mainboard (2).
Figure 3-23. Touchpad Board Cable
Machine Maintenance
Door" procedure described on page 3-10.
Module" procedure described on page 3-11.
Module" procedure described on page 3-15.
Modules" procedure described on page 3-17.
Keyboard" procedure described on page 3-18.
0
3-21