Removing the Palmrest Module/Upper Cover
1. Perform the
"Removing the ODD
described on pages 3-11and
2. Perform the
"Removing the
3. Open the Smart Card cable connector latch (a) and then disconnect the cable (b).
Figure 3-32. Smart Card Cable
4. Open the power button launch board cable connector latch (a) and then disconnect the
cable (b).
Figure 3-33. Power Button Launch Board Cable
Machine Maintenance
Module" and
"Removing the HDD
3-15
respectively.
Keyboard" procedure described on the preceding section.
Module" procedures
3-25
0