Page 1
UB-2PN Universal 2” Pneumatic Button Compliant Compliant We protect the things that protect you. ®...
Page 2
* For access control installations, power for the UB-2PN must be supplied by a power source Listed to UL294. When used for access control, this device shall be used as a part of an access controlled egress door system.
Page 3
2 in. BUTTON 1. TO CHANGE BUTTON COLOR AND ROUND MESSAGE ACTUATOR CAP SPRING DIE CAST PLATE REAR VIEW ALIGN TAB ON ACTUATOR WITH SLOT BUTTON. TURN CLOCKWISE TO LOCK. PUSH BUTTON ACTUATOR INSERT ASSEMBLY WITH SPRING INTO PLATE. 2 in. BUTTON ACTUATOR CAP SPRING DIE CAST PLATE...
NORMAL POSITION MAGNETIC LOCK 3. INSTALL OR REMOVE CONTACT BLOCK MESSAGE LAMP POWE 12-30 V INSTALL POWER IN 12-30 VDC/VAC To attach, align tabs (as shown) and gently snap top, then bottom. Be sure to hear BOTH tabs snap into place. Contacts can be rotated 180°...
Page 5
4. ATTACH POWER FOR MESSAGE LED (if desired - see drawing) MAG LOCK NC CONTACTS NO CONTACTS UB-1L LED PCB UL Listed 12-24 VDC Power Supply NORMAL POSITION BUTTON ACTIVATED MAGNETIC LOCK MESSAGE LAMP CONTACT DIAGRAM CONNECTION AND LEAD WIRE COLOR CODE N AND LEAD WIRE LOR CODE...
CAUSE DAMAGE TO TIMER. 5. MOUNT BUTTON ONTO ELECTRICAL BOX 6. CUSTOM LABELS To create your own custom label, size to fit in .48h x 2.23w as shown below. Also available online at: www.sti-usa.com/ublabel POWER IN .48 in. 12-30 VDC/VAC 2.23 in.
Page 7
(B=blue, G=green, W=white or Y=yellow) 2” LENS KIT FOR UNIVERSAL BUTTON UB-2LENS CONTACT ASSEMBLY FOR UB-1 KIT-UB-1C COVERS BOPPER STOPPER STI-6518 UNIVERSAL STOPPER STI-13000 Series STOPPER II STI-1100 Series ® – See website for complete cover details – - 7 -...
Need help?
Do you have a question about the UB-2PN and is the answer not in the manual?
Questions and answers