Mqrock1/Mqrsp1 Setup For Models Hbzdv4736 - Marquis SOLACE Installation Instructions Manual

MQROCK1 / MQRSP1 Setup for Model HBZDV4736
WARNING: Failure to position the
parts in accordance with these diagrams or
failure to use only parts specifically
approved with this appliance may result in
property damage or personal injury.
STEP 1: Remove the back log holder, log supports, and
the grate bar. Replace/reinstall the 2 screws from the grate
bar.
Glass or Silicon Sand
Lava Rock Shown
STEP 3: Fill around the rock platform with lava rock.
Sprinkle vermiculite over top of the lava rock. Do not
place lava rock or vermiculite on top of the burner
tube.
PARTS LIST: Rock #1 - 5 pieces; Rock #3 - 6
pieces; Rock #4 - 10 pieces; Rock #6 - 9 pieces.
STEP 2: Attach the back rock support using the existing
screws from the back log holder. Using the platform
mount access holes, attach the rock platform as shown.
STEP 4: Place rocks #1 onto the burner as shown. Do
not place rocks directly onto the burner tubes.
50