Endress+Hauser Proline Prosonic Flow P 500 Functional Safety Manual page 21

Proline Prosonic Flow P 500 HART
The diagnostic behavior is set in such a way that the measuring device is set to the safe state
when an error occurs. This means that the diagnostic messages listed in the graphic are set to
alarm and the current output adopts the configured failsafe mode →  17.
Endress+Hauser
Setup
Current output 1
Assign
current output
Volume flow
Diagnostics
Simulation
Assign
process variable
=
Off
=
Simulation
current output 1
=
Off
Use in protective systems
A0025650-EN
A0021506-EN
21