Table of Contents
Advertisement
*To change from AUTO to MANUAL pressure mode and vice versa, press
AND HOLD the "
the current pressure mode selected,"AUTO" or "MANUAL".
After 20 seconds of inactivity, the display will save the adjustments and exit
calibration mode. Note: Calibrations will be erased if the display is reset, set
to auto pressure mode, or if the batteries are removed and power adapter is
unplugged.
Replace Intelli-Time
Intelli-Time technology is powered by a pre-installed coin-cell battery that stores
the time and date settings. The battery has a shelf life of several years. Time
and date will need to be entered after replacing Intelli-Time battery. To replace
the Intelli-Time battery:
1. Locate the coin cell
battery compartment
door in the battery
compartment of the
display unit. Unscrew and
remove the compartment
cover.
2. Insert 1 x CR2032 coin
cell battery into the
battery compartment,
as shown. Install battery
with "+" positive terminal
facing OUT.
3. Screw in the battery cover.
" button for at least 10 seconds. The display indicates
Clock Battery
®
16
CR2032
3V
Advertisement
Table of Contents
