Page 1
Instruction Manual Display for 3-in-1 Weather Sensor model 06020 Package Contents 1. Display 2. Power Adapter 3. Instruction Manual This product requires an AcuRite 3-in-1 Weather Sensor (sold separately) to be operational. IMPORTANT PRODUCT MUST BE REGISTERED TO RECEIVE WARRANTY SERVICE...
Features & Benefits 6. 12 to 24 Hour Weather Forecast Self-Calibrating Forecasting pulls data from your sensor to generate your personal forecast. 7. Storm Indicator Indicates when barometric pressure drops. 8. Humidity Level Indicator Indicates a high or low indoor humidity level.
Page 3
Features & Benefits BACK OF DISPLAY 6. Plug-in for Power Adapter Button For setup preferences. 7. Power Adapter Button 8. Backup Battery Compartment For setup preferences. 9. Reset Button Button Full reset to factory defaults. For setup preferences. 10. A-B-C Switch Button ID code that must match sensor’s A-B-C Press to access all-time high and low...
Display Setup Set the A-B-C Switch 2. Insert 3 x AAA alkaline batteries into the battery Locate the A-B-C switch inside compartment, as shown. the battery compartment. Set Follow the polarity (+/–) the A-B-C switch to A, B or C. diagram in the battery You must select the same letter compartment.
Set the Time, Date & Units Press the “ ” button, located on the back of the display, to enter SET MODE. Once in set mode, the preference you are currently setting will blink on the display. To adjust the currently selected (flashing) item, press and release the “ “ or “...
Placement for Maximum Accuracy AcuRite sensors are sensitive to surrounding environmental conditions. Proper placement of both the display and the sensor are critical to the accuracy and performance of this product. Display Placement Place the display in a dry area free of dirt and dust. To ensure accurate temperature measurement, place out of direct sunlight and away from heat sources or vents.
Barometric Pressure Subtle variations in barometric pressure greatly impact the weather. This weather center displays the current pressure with an arrow icon to indicate the direction the pressure is trending (FALLING, STEADY, or RISING). Moon Phase Track the phases of the moon, conveyed through simple lunar phase icons: WAXING FULL WANING...
Troubleshooting Problem Possible Solution • Relocate the display and/or the 3-in-1 sensor. The units must be within 330 ft (100 m) of each other. • Make sure both units are placed at least 3 feet (.9 m) away from electronics that may interfere with the wireless communication (such as TVs, microwaves, computers, etc).
Troubleshooting Problem Possible Solution • Make sure both the display unit and 3-in-1 sensor are placed away from any heat sources or vents (see page 6). • Make sure both units are positioned away from moisture Inaccurate sources (see page 6). temperature or •...
Page 10
Calibration The indoor / outdoor temperature and humidity readings, and barometric pressure can be calibrated on the display to improve accuracy. Calibration can improve accuracy when sensor placement or environmental factors impact the data accuracy. 1. To access calibration mode, press AND HOLD the “ ”, “...
Specifications Outdoor: -40ºF to 158ºF; -40ºC to 70ºC TEMPERATURE RANGE Indoor: 32ºF to 122ºF; 0ºC to 50ºC Outdoor: 1% to 99% HUMIDITY RANGE Indoor: 1% to 99% 0 to 99 mph; 0 to 159 kph WIND SPEED 330 ft / 100 m depending on home construction materials WIRELESS RANGE 433 mhz OPERATING FREQUENCY...