Replace Intelli-Time Battery - ACU-RITE 02030RM Instruction Manual

3. Press the "▲" or "▼" buttons to calibrate the pressure higher or lower.
4. Press the "Set" button to confirm the calibration adjustment.
Note: The "
After 20 seconds of inactivity, the display will save your adjustments and exit
calibration mode. Note: Calibration will be erased if the display is reset or if
batteries are removed and the power adapter is unplugged
To exit manual pressure mode and return to auto mode press and hold the
"Set" button for at least 10 seconds.
Replace Intelli-Time Clock Battery
Intelli-Time technology is powered by a pre-installed coin-cell battery that stores
the time and date settings. The battery has a shelf life of several years. To
replace the Intelli-Time battery:
1. Locate the coin cell battery
compartment door in the
battery compartment of the
display unit. Unscrew and
remove the compartment
cover.
2. Insert 1 x CR2032 coin
cell battery into the battery
compartment, as shown.
Install battery with "+"
positive terminal facing OUT.
3. Screw in the battery cover.
" icon will remain illuminated next to the calibrated value.
13