6
Place the adjustment sheet on the platen glass, with the printed side face down.
●
Place the adjustment sheet so that the black line (
7
Gently close the feeder.
8
Press
.
➠
The adjustment image is scanned and adjustment starts. In approximately 8 seconds, the adjustment is
finished.
9
Open the feeder, and remove the adjustment image.
10
Gently close the feeder.
If the <Could not perform correction.> message is displayed
●
Did you load plain/recycled/heavy paper or label of A4 or Letter size?
●
Did you place the adjustment sheet on the platen glass with the adjustment image printed side face down,
with the black line toward the left side of the machine?
●
Has a paper jam occurred?
●
Is the amount remaining in toner cartridge required for correction sufficient? If the amount remaining in a
toner cartridge is low, it is recommended that you replace toner cartridges.
Remaining in the Toner Cartridge(P. 794)
Maintenance
Clearing Jams(P. 722)
804
) is toward the left side of the machine.
Checking the Amount