Table of Contents
Advertisement
●
To cancel sending, tap <Cancel>
When placing documents in the feeder in step 1
When scanning is complete, the I-Fax is sent.
When placing documents on the platen glass in step 1
When scanning is complete, follow the procedures below.
1
If there are additional pages of documents to be scanned, place the next document on the platen
glass, and press
●
Repeat this step until you finish scanning all of the pages.
●
When there is only one page to be scanned, proceed to the next step.
2
Tap <Start Sending>.
➠
The I-Fax is sent.
If the <SMTP Authentication> screen is displayed
●
Enter the user name and password with the numeric keys, and tap <Apply>.
If a Send Error Occurs
Error notifications are sometimes sent to the e-mail address set to the machine. If you leave it as-is, it may
result in an insufficient remaining capacity of mailbox depending on your mail server. It is recommended that
you clear the mailbox periodically.
To clear the mailbox
●
When the mailbox is cleared, all e-mail in the server mailbox is deleted. When you specify the e-mail
account that you use usually, you should first check whether any e-mail in the mailbox needs to be kept.
1
Start the Remote UI and log on in System Manager Mode.
2
Click [Settings/Registration].
Faxing
<Yes>.
.
228
Canceling Sending Documents (Fax/I-Fax)(P. 176)
Starting Remote UI(P. 606)
Advertisement
Table of Contents
