Table of Contents
Advertisement
5
Restart the machine.
●
Turn OFF the machine, wait for at least 10 seconds, and turn it back ON.
Checking whether the settings are correct
●
Make sure that the Remote UI screen can be displayed with your computer (
If a computer is not available, you can check the connection by using the operation panel (
Network Connection(P. 439) ).
If you changed the IP address after installing the printer driver
●
If you are using an MFNP port, and the machine and the computer are on the same subnet, then the
connection will be maintained. You do not need to add a new port. If you are using a standard TCP/IP port,
then you need to add a new port.
*
If you are not sure which type of port you are using, see
Testing the Network Connection
1
Tap <Menu> in the Home screen.
2
Tap <Network Settings>.
●
If the logon screen appears, enter the correct ID and PIN using the numeric keys, and then press
Logging on to the Machine(P. 43)
3
Select <TCP/IP Settings>
4
Enter the IPv4 address of another device on the network, and tap <Apply>.
➠
If a proper connection has been established, the following screen is displayed.
Network
Configuring Printer Ports(P. 453)
Checking the Printer Port(P. 893) .
<IPv4 Settings>
<PING Command>.
439
Starting Remote UI(P. 606) ).
Testing the
.
Advertisement
Table of Contents
