Table of Contents
Advertisement
●
The plastic part (
2
Wipe the scanning area (
3
Wipe the back side of the transparent plastic part.
4
Wait for the plastic part to dry completely.
5
Place the transparent plastic part back into position.
●
Make sure of the proper orientation, then hold the tabs and place the plastic part back into position
by gently lowering the frontward end first.
4
Wait for the cleaned area to dry completely.
5
Gently close the feeder.
6
Reconnect the power cord and turn ON the machine.
Maintenance
) is rather damageable. When removing it, be careful not to bend it.
).
785
Advertisement
Table of Contents
